Building A Garden Basket For Supplies And Picking

This is finally the video about how I make the garden baskets that we use.
This is the hardware cloth I got at Home Depot https://www.homedepot.com/p/Everbilt-1-2-in-x-2-ft-x-5-ft-PVC-Hardware-Cloth-308253EB/205960854

50 Comments

  1. Jay H on December 19, 2020 at 9:36 pm

    i don’t need one of these, but now i want one lol. great work, looks fantastic!

  2. Jacqueline Wells on December 19, 2020 at 9:36 pm

    That’s a beautiful basket and very well made. Like the leather look on it. I wouldn’t mind having one of them. Thanks for sharing how it’s made.

  3. Greg Mislick on December 19, 2020 at 9:37 pm

    Resaw wide boards – if the band saw can’t hack it alone, and that board is 11" … use the Table saw to help – slot into it from each edge , you can probably get close to 4" in from each edge, then you would only have 3 – 5 " to resaw, and a lot less waste to plane off.

    I don’t have a band saw yet and this is how I resaw, only I have to use a hand saw for the bit int he middle … and hand planes … you kids with all that new fangled stuff – Oh how I’m green with envy! ( as green as your Grizzly stuff !)

  4. Colorado Crafter on December 19, 2020 at 9:37 pm

    Great project! Enjoyed the build!

  5. David Olson on December 19, 2020 at 9:37 pm

    Thank you for your detailed video. My wife, an avid gardener, saw a garden hod pictured on the internet–made and sold in Maine. She requested one for her birthday. I found your video and liked your design better. I am finishing it up now. I liked the idea of the Kreg screws, but wanted a brass look. I found a brass Cabinet Screw with a T-15 star drive low profile washer head at Home Depot by GRK Fasteners. It has a low profile washer head. Because of the low profile head, I am able to use them on the rails instead of the flathead countersink screws. Thanks again. I am sure my wife will enjoy this basket.

  6. unit woodworking on December 19, 2020 at 9:40 pm

    I like your idea that you made nice basket with different materials. To be used as garden basket the mesh is the best, I think.

  7. Valerie Howden on December 19, 2020 at 9:40 pm

    I have to hide this from my husband … he would love to have a workshop like yours! Amazing project. Stay safe everyone.

  8. Raw Bacon on December 19, 2020 at 9:41 pm

    Leather & Tacks was a nice touch.

  9. Splash with Ariel on December 19, 2020 at 9:43 pm

    Great video! Beautiful basket

  10. Gene Cooksey on December 19, 2020 at 9:45 pm

    New subscriber to your channel, checking out your videos, please subscribe back to Gene Cooksey, thanks

  11. Wormkiller Dan on December 19, 2020 at 9:46 pm

    Excellent project and craftsmanship as usual! I’m with you on those Kreg screws, bought a bunch when I bought my screw kit. Thanks for sharing! Stay safe!!

  12. Jim Pritz on December 19, 2020 at 9:48 pm

    Beautiful baskets much nicer than anything you could ever buy. If you could buy a basket like these it would probably cost a fortune. Thanks for sharing this project.

  13. dave hogan on December 19, 2020 at 9:49 pm

    Awesome job!!! Do you ever sell any of these? Your a real perfectionist!! Stay safe and healthy to you and your family!!

  14. Robin Song on December 19, 2020 at 9:49 pm

    Beautiful work sir, you are true artisan.

  15. casy casy on December 19, 2020 at 9:54 pm

    its a simple basket but a beautiful basket, nice job

  16. The spook who sat by the door Powell. on December 19, 2020 at 9:55 pm

    Wow awesome I’ve been waiting for this video!

  17. Diane Ladico on December 19, 2020 at 9:55 pm

    Gorgeous. Thanks for showing all the details. I’d be lucky to put together a couple of pizza peels and some molding but I’m always in awe of the way you craft things.

  18. Randy Rife on December 19, 2020 at 9:56 pm

    Really enjoy watching all your content. I’m very interested in finding one of those mats with the angles and other information printed on it – the work surface you were using to assemble the basket. Thanks!

  19. Lisa Nowakow on December 19, 2020 at 9:59 pm

    You are a wonderful craftsman and gardener!

  20. tina roman on December 19, 2020 at 10:00 pm

    Those are absolutely perfect. I wish I had the talent & equipment to make a couple. You have such a talent & patience to make these. To bad your state is so expensive to be able to sell them. I’m positive you could do very well selling these. Stay healthy & thank you for all the videos.

  21. acscolo on December 19, 2020 at 10:01 pm

    Beautiful work of art. The only thing I would change is I would use brass screws for any that are showing. "Where love and skill work hand and hand expect a master piece."

  22. Roshann Al-Turk on December 19, 2020 at 10:02 pm

    Ohhhh I’ve been wanting a garden hod for SO long but they are super expensive. I think I’ll try making one during this quarantine. Thank you so much for showing us!

  23. Lod Price on December 19, 2020 at 10:02 pm

    That is very nice. Those that you make are far nicer looking than any that a person can buy. Yours is probably a lot stronger.

  24. TheFlyingotto on December 19, 2020 at 10:06 pm

    how much for me to buy one from you? 🙂

  25. oddo pops on December 19, 2020 at 10:09 pm

    👋😊

  26. Tamara Bonêt on December 19, 2020 at 10:10 pm

    How long is yours and wide? What size of staples to use? Thank you so much! I want to make one as a gift for my dad and one for myself too. 😉

  27. Wesley Wall on December 19, 2020 at 10:11 pm

    Wonderful job ! ☺

  28. Gary Maynard on December 19, 2020 at 10:13 pm

    Very nice and well done!

  29. Dani W on December 19, 2020 at 10:13 pm

    Any chance you make baskets to sell? 😀. Love watching you build things! Thanks for sharing!

  30. Busy Beaver Productions on December 19, 2020 at 10:14 pm

    Beautiful

  31. Kevin Byrne on December 19, 2020 at 10:14 pm

    Thank you for taking are minds off corona for awhile. God Bless

  32. Wendy C. on December 19, 2020 at 10:16 pm

    You have some very nice tools sir!!👍

  33. rnupnorthbrrr SM on December 19, 2020 at 10:16 pm

    Beautiful !!!!

  34. iamkellymc on December 19, 2020 at 10:16 pm

    🌻🥦🍇🥒🥬 I just discovered your YouTube Chanel and I really need to say: how amazing is everything that you do. Attention to details In Everything. I am in love to watch your videos. And this night I introduced to my husband and he really enjoy it too. The way you do work is inspiring and we can see that you love what you do. Your garden is beautiful. I am wondering where are you, I am in CT, if it not very far I told my husband I would love to buy veggies directly from your garden. Also the snacks and sauces that look so delicious… of course I will like all your videos and I already subscribed because you deserve it. Thanks for sharing it. I love people who do things with care, attention, simple the best. Thank you 🙏🏻

  35. waldivia bohn on December 19, 2020 at 10:17 pm

    I love it.

  36. Patty Miles on December 19, 2020 at 10:18 pm

    Awesome design and fantastic skills! Love it!

  37. mike brown on December 19, 2020 at 10:18 pm

    If I made something like that, I couldn’t bring myself to use it in the garden. That’s high grade furniture that belongs in a museum. 🙂

  38. Marcus Skidmore on December 19, 2020 at 10:18 pm

    Top work mate, well done!

  39. Charlotte Smart on December 19, 2020 at 10:19 pm

    Can I buy one.

  40. L. J. Bush on December 19, 2020 at 10:20 pm

    That turned out nice, you always do a nice job on your projects. Thanks man.

  41. Tracey Dysert on December 19, 2020 at 10:20 pm

    Awesome baskets! I’m amazed at the work you put into these! I love woodworking. Thanx for sharing!

  42. Eric Borduas on December 19, 2020 at 10:22 pm

    I had a similar problem with the Kreg automaxx clamps. I email customer support and they indicated that the clamps were not adjusted properly. Here is what they suggested:

    "We found out our manufacture had put the adjustment screw in too tight when assembling those. We will have you do a reset to see if we can get it to work. So you will open the jaws and back out that adjustment screw to the point where it is really loose but not falling out. You should see around 1/4" for the 90 Degree Corner Clamps and 3/8" for the Right Angle Clamp of threads between the bottom of the head of the screw to where it screws into the mechanism. Then you will close the jaws then open them back up. After that, you can bring that adjustment screw back to the positive around halfway down and try to clamp it down. That adjustment is not an exact adjustment, you may have to tighten it more or loosen it more to get the correct pressure you want to apply."

  43. Greg Homestead on December 19, 2020 at 10:28 pm

    Very creative 👍👍

  44. Native Doll on December 19, 2020 at 10:28 pm

    Wow love them very cool

  45. Tamara Bonêt on December 19, 2020 at 10:28 pm

    Love your basket so much! I saw some on Etsy but they don’t hold a candle to yours 🙂 Thank you for sharing how you made it. I will try to make a more simple one and with a branch for a handle. Just was wondering why you use the vinyl coated hardware cloth instead of without the coating?

  46. Scott Walsh on December 19, 2020 at 10:30 pm

    Might be a good gift project for my dad, thanks!

  47. mgreene939 on December 19, 2020 at 10:30 pm

    How much does that incra sled weight?

  48. Christine Schmalz on December 19, 2020 at 10:30 pm

    lol, 100% agreement…. total love hate relationship with Kreg. Nice hod!

  49. Partly Sunny on December 19, 2020 at 10:33 pm

    This was fun to watch. You do nice work.

  50. Madi Todd on December 19, 2020 at 10:35 pm

    I feel like his biggest luxury’s are natural light and tools.

Leave a Comment