Easy DIY Garden Tools Rack

Easy DIY Garden Tools Rack

This is an excellent project for even a novice woodworker. Nearly any one of any skill level can complete this project with just a few simple tools. Digital plans for this build can be found at www.foleywoodworking.com

This version of the Easy DIY Garden Tool Rack was designed specifically to fit both my tools and the space I store my garden tools. This design can be easily modified to fit any space or size of tool, and can be completed in less than an hour with only a couple of 2x6x8’s.

Blog Post: http://foleywoodworking.com/easy-diy-garden-tools-rack/


Subscribe on Youtube https://www.youtube.com/foleywoodworking
Follow on Twitter https://twitter.com/FoleyWoodwork
Like on Facebook https://www.facebook.com/FoleyWoodwor…

Website: http://foleywoodworking.com/

Digial Plans for this build:  http://foleywoodworking.com/product/easy-diy-garden-tool-rack-digital-plans/  

music by audionautix.com


  1. KJV ReViews on June 20, 2021 at 1:19 am

    Perfect simple yet very sturdy design! Just what I was looking for! Thanks for the video!

  2. 243WW on June 20, 2021 at 1:20 am

    Good job. The music made me ill

  3. Vincent Esposito on June 20, 2021 at 1:21 am

    Was the 5 deg angle on the back of the brackets to tilt the brackets upward? It looks like the cut was not the full height of the bracket – like only about half. See 55-105. Why?

  4. Robt Smith on June 20, 2021 at 1:22 am

    Thanks , This gave me another idea to use !

  5. Alan Meijer on June 20, 2021 at 1:24 am

    Why all the back’n’forth cutting with the miter saw? (Justifying the slide mechanism? 🙂 LOL). Just kidding. No really. Why?

  6. Bill Strike on June 20, 2021 at 1:25 am

    Nice! I have to laugh a little because I have a tendency to build things with overkill as well.

  7. Phillip Hinkle on June 20, 2021 at 1:27 am

    Quick and easy.. Thanks. How deep are the brackets?

  8. Christopher Umberger on June 20, 2021 at 1:28 am

    How long are the arm piece and what is the angle cut at the bottom?

  9. James Joiner on June 20, 2021 at 1:28 am

    Very nice work sir. I finally found the design I intend to use my my garage because of you.
    Whats the deepest you’d recommend those arms reach?
    From my mounting wall, I have roughly 10" before it interferes with my garage door railing. I like your stacking method but dont want to add too much weight. I’d obviously would store heavier tooling against the backer board and lighter ones on the opened side.
    What final length did you end up with on yours?

  10. 777eternal on June 20, 2021 at 1:32 am

    Would be nice if I had all the saws and drills to make

  11. Gotee Gotee on June 20, 2021 at 1:43 am

    unflexible and overkill

  12. Brian on June 20, 2021 at 1:45 am

    thank you!, I just built this today using your video

  13. trent farrell on June 20, 2021 at 1:45 am

    Why not cut them to the correct angle to start with then you get two cuts in one motion.nice job though.good project

  14. heavy feather on June 20, 2021 at 1:46 am

    Great video this will definitely help organize all the shovels and rakes!

  15. Shantyman47 on June 20, 2021 at 1:47 am

    You must think wood grows on trees. What a waste

  16. shop Art on June 20, 2021 at 1:48 am

    The only difference I see with my tools and yours is my tools are well used. Nice rack I like it a lot.

  17. Matt G on June 20, 2021 at 1:51 am

    Why do you do the slight back and forth when you start your cut with the miter saw? Does it prevent tearout?

  18. Jayden Brumous on June 20, 2021 at 1:52 am

    just google Woodprix :))

  19. RG Tree Service on June 20, 2021 at 1:52 am

    Great video

  20. The Backyard Griller on June 20, 2021 at 1:59 am


  21. Jason Hodgws on June 20, 2021 at 2:00 am

    Should have cut the small peices while still a whole piece. Safer

  22. Machigane on June 20, 2021 at 2:02 am

    Thanks for posting this. I got some 2×4 from a pallet that was carrying something very tall, lugged it home in the pickup, and kept the 2×4 for a rainy day. After 20 something years of putting my garden tools in a corner or wherever I could fit them I finally looked up organizational ideas and decided this was the one for me. It works *perfectly* and I am ecstatic.

    Finally decided to organize my shed-like garage (it’s barely big enough for a MINI) and installed some pegboard as well. Thanks for posting this. This was a 1 out of 10 in terms of difficulty – the hardest part was finding my countersink bit – and a 10 out of 10 in terms of functionality and form!

    And just to clarify 2×4 work fine. I would suggest people use whatever spare material they have. A zero cost project like this is just fantastic.

  23. Kurt Kier on June 20, 2021 at 2:03 am

    Hi! I just built this tool rack today. This is a very straightforward, simple design, and it will serve me for years to come. Thanks for the vid!

  24. Luna Rainbow Kangaroo on June 20, 2021 at 2:07 am

    Wonderfully I have so many spades , shovels , rakes perfect diy

  25. Harold Rowland on June 20, 2021 at 2:08 am

    How much 2 x 6 do I need for this project?

  26. Foley Woodworking on June 20, 2021 at 2:10 am

    I’ve had a few people reach out to me about the plans. They are now available on my website. http://foleywoodworking.com/product/easy-diy-garden-tool-rack-digital-plans/

  27. Joe Foley on June 20, 2021 at 2:10 am

    Thumbs up at least because of the name 👍

  28. Mitchell Kasdin on June 20, 2021 at 2:14 am

    You should clamp the workpiece or use a hold down keep your fingers away from the blade please.

  29. sampsta on June 20, 2021 at 2:14 am

    site says free plans but site says you have to pay so is it free or not

  30. Beth Smith on June 20, 2021 at 2:15 am

    more versatile than other single tool brackets. able to hold more in less space. real benefit.

  31. Manuel Castillo on June 20, 2021 at 2:15 am

    2×4? or 2×6? Great work!! I want to make those for my shed.

  32. Xiong Yang on June 20, 2021 at 2:16 am

    Yes! I’ve been looking for an organization style like this for my tools!! Thank you!!!

Leave a Comment