Link to purchase:


Don’t forget to like comment and subscribe for more.

Thanks for watching.


  1. speterbilt on December 17, 2021 at 1:21 pm

    I bought this tool. Adj carb in like 5 seconds after it started on 3rd pull. This machine is a freakin beast. The string line is strong and spins so fast the grass looks like a tornado flying around. I hope it last awhile. It sounds mean as hell just idling. Ebay for $178. $209 with shipping. Only thing wrong is cutoff switch didn’t work. I just pull sparkplug boot off to kill it.

  2. sarita Bavdane on December 17, 2021 at 1:22 pm

    Who Company brand ????? Name

  3. declanj94 on December 17, 2021 at 1:25 pm

    Thank you for the video, I’ll look now to see if there’s a review after using it more.
    The engines aren’t that bad usually, just take more maintenance than you’d like. Also the choke is upside down. On and off are incorrectly labeled on these machines pretty often.

  4. Raj on December 17, 2021 at 1:25 pm

    The cutter shuts down when i put the choke to OFF. Is that normal?
    Also lot of fuel consumption… how to fix that?

  5. Otto Fumbler on December 17, 2021 at 1:25 pm

    20:50 Can’t see from the video because fingers were covering it. Is the internal shaft SQUARE or SPLINE?

  6. Red Mustang 1976 on December 17, 2021 at 1:25 pm

    I had one off these it had a leaking fuel tank in no time. Total trash.

  7. Hot Dogs on December 17, 2021 at 1:25 pm

    Will this united take standard attachments from brands like ryobi or troy built with the standard universal shaft?

  8. WALLACE7084 on December 17, 2021 at 1:26 pm

    Can you or someone tell me the width of the tube of the attachments so I can see if an attachment I have would fit if I get one.

  9. matt cooper on December 17, 2021 at 1:27 pm

    Thanks for your video. Just received my unit. Could you tell me where you got you replacement heads for the line trimmer a link if is Amazon a lot of units show up if I search speed feed 450 on amazon.

  10. NaeFliesOnMe on December 17, 2021 at 1:27 pm

    Thank you for this very useful and extensive review. I’ve just received mine today (T-Mech 5 in 1 Multi-Tool ref.10611) and when I had a look at the choke switch I noticed that they have added a little sticker with "Cold start – Choke on" (TOP position) and "Run – Choke off" (BOTTOM position) which contradicts the instructions on the original moulded plastic cover "OFF" (TOP) and "ON" (BOTTOM).

    Also, when it comes to the oil-fuel mix, the ratio is clearly 1 to 40 (in the instruction manual and at the back of the engine itself). Can’t wait to get this going!

  11. Stormtrooper on December 17, 2021 at 1:30 pm

    I bough the same one under the brand name of "Denzel"!
    Its realy is a very well engineered trimmer/cutter.
    But potential buyers be warned!!! This thing is heavy as hell! With fuel and everything is probably over 10kg! That’s Stihl 880 teritory just for comparison!! My hands are still thingling(and its midnight now),after a few hours of sawing around my garden today!
    You have been warned!
    For occasional cut or trim the hedge it will be ok probably. But if you look for more than hour or two work… than this wouldnt cut it!(pun intended) 😁
    Just shell the money for an Echo…

  12. rnds76b on December 17, 2021 at 1:31 pm

    Got mine a couple of days ago…e-bay deal…$177.00…same exact unit…package was missing the chain saw blade safety cover and the "spike" type handle…wrote to their customer service yesterday…waiting to hear back from them…won’t be the end of the world if I don’t. However, a major glitch is the pull starter mechanism…on the 3rd start, the pull starter jammed in the extended position…chord won’t retract…took the mechanism off the machine and tried to loosen the Phillips screw that holds it onto the housing…figured that would possibly loosen up the tension on the recoil spring…the screw won’t budge…don’t want to force the screw…anyone had the same issue?

  13. leugim orac on December 17, 2021 at 1:31 pm

    I have one just like it,how do I slow the gas down, It’s like I been pulling the trigger on it but I’m not, I need help and also where can I buy only anothe extension pole for it

  14. Guerrero’s Junk Hauling & Garden Services on December 17, 2021 at 1:32 pm

    Still running? Waiting on mine…

  15. YAMMY DODGER 1 on December 17, 2021 at 1:34 pm

    Weed wacker head, is that the American version of Wack ‘o” mole!!

  16. Kevin Pilkington on December 17, 2021 at 1:34 pm

    Cool deal boss! Hey, I like the driveshafts slidin out…ifn you take em out, clean and grease em every once in a while…well the driveline will last maybe even from now on. Great deal and great video….heck, ya sold me on one…lol! Many Blessings, Kev

  17. johnnybarbar on December 17, 2021 at 1:35 pm

    The rubber things are gaiters to go over your shins and ankles and boot tops. No zerk on the trimmer head so you don’t blow out the seals. You use a squeeze bottle to add low viscosity grease.

  18. Christopher M. on December 17, 2021 at 1:37 pm

    A little googling and I came across the Liam Sherwood 5 in 1 same exact thing as this. It does come with an Oregon chain and branded Liam. They sell that brand on Amazon UK and not available for shipping here to the U.S. I’d be willing to bet this the company that makes it for them but sells it cheaper unbranded which is the case for a lot of stuff we buy. It’s amazing how many things we buy that are branded that we think are better quality because it’s branded or "made to US standards" It’s still made in China! Great video sir!

  19. Florida_customs on December 17, 2021 at 1:37 pm

    I use a still fs100rx but dang that thing is a beast I will look into getting one

  20. michael davis on December 17, 2021 at 1:39 pm

    I can’t remove the cap to add string to it.

  21. Marcos Valiente on December 17, 2021 at 1:44 pm

    what piece of equipment was the speed feed 450 originally bought for? I’d like to get one.

  22. Joeyy Sossa on December 17, 2021 at 1:45 pm

    Whats the make and model..n dies it come with a harness..for shoulder support

  23. TheHarlemShow on December 17, 2021 at 1:46 pm

    Just found your vid that strimmer was that good it nearly took it’s self to do the job when you put it down was looking for one but must of stopped selling as link was a year ago as not working Shame looks good

  24. Ben Danise on December 17, 2021 at 1:46 pm

    Is it still working good and would you recommend it

  25. 166PolarBear on December 17, 2021 at 1:47 pm

    The hedgecutter is crap thin metal blades

  26. Shawn Dubay on December 17, 2021 at 1:53 pm

    Nice machine. They set it rich for the breaking in/running in period of the new engine. I break in/run in a new 2 stroke engine for a full year before I run at full power. I have had and used my trimmer for seventeen years and still runs like new.

  27. Henry & Joseph on December 17, 2021 at 1:54 pm

    What is NAME of the unit ??

  28. Conner Carraway on December 17, 2021 at 1:55 pm

    How long did it take to deliver for you

  29. Daniel Morris on December 17, 2021 at 1:55 pm

    End caps stops rods coming out, I’m having trouble finding the oil filter

  30. Jonathan Mitchell on December 17, 2021 at 1:56 pm

    Do not waste your time on a product like this it’s a price of shit and the part where the engine connects to the shaft of the tool is easily broken and will get stuck or jammed. You might as well spend the $400 on a good product that will last more than one year

  31. moto tommy on December 17, 2021 at 1:58 pm

    I turned the idle down abit on mine, they idle to hi from stock for my liking

  32. Radio Tech on December 17, 2021 at 2:02 pm

    Got one for around 100 euros, great bit of kit.

  33. CyberDiogenes on December 17, 2021 at 2:02 pm

    Can you take a look inside the auto feed strimmer head and let us know how to reload the nylon. The one I have has no holes in the spool to hold the line as you wrap the new stuff on. Cheers.

  34. DarthKira on December 17, 2021 at 2:02 pm

    I find this a good machine. The strimmer part is good, the chainsaw bit is good, but the hedge part is way to heavy. Been using it for 2years now nps. Would buy another 1 in a heart beat, as u can buy the strimmer, chsinsaw an hedge bit separate, same with the engine part

  35. Marc Mourant on December 17, 2021 at 2:03 pm

    Just ordered myself one of these 👍🏼

  36. Rafael Adamović on December 17, 2021 at 2:04 pm

    That scrow is idle speed

  37. Qlimax on December 17, 2021 at 2:05 pm

    Howd it hold up

  38. Lewis Pewsey on December 17, 2021 at 2:06 pm

    Brilliant video very informative thankyou 👍

  39. shamus callaghan on December 17, 2021 at 2:07 pm

    Why was the Choke stiil in the choke position.

  40. roadstar499 on December 17, 2021 at 2:08 pm

    so other than cheap fuel lines and cheap head has block and carb been good? do you have over 50 hours on it yet?thanks

  41. james harding on December 17, 2021 at 2:08 pm

    Where u get parts

  42. Marina Pawél on December 17, 2021 at 2:09 pm

    Received before due date which was great. Assembly of product was easy with simple to follow instructions. Started on 2nd pull and has continued to do so each time. I use this strimmer almost everyday on both light and more heavy / thicker grass and bushes, have not had a problem so far. Unlike more expensive manufactured strimmers I have previously owned. Great value for money and would definitely recommend.

  43. Stanley Keith on December 17, 2021 at 2:09 pm

    The one you got is much heaver than the one I bought, I have the same brand and got mine from Home Depot. You got a good deal. I wish I had saw your video first. Mine does not have any grease fittings. Mine has a Number on the back MFT 26. You got a deal. It did start right up. The engine is very heavy.

  44. Andrew Smith on December 17, 2021 at 2:12 pm

    Is this a copy of the shindawa? It looks like mine

  45. incubrian on December 17, 2021 at 2:13 pm

    im replacing a Stihl weedeater with this model, and i must say THIS is the best value in weedeaters. it is built SO well, and in some ways far better than my old stihl. great video btw man! you did a wonderful job showing all the details, and i REALLY love how you answered my question about the speedfeed 450! the 450 would not fit on the stihl without heavy modification, so i am SUPER happy i can now use the 450 head!! i absolutely love this tool and cannot recommend it enough.

  46. dickinsonroxx on December 17, 2021 at 2:15 pm

    i got one of theses cheapies a coocher 42cc $155 walmart cant beat the price had trouble starting it but maybe my fault with bad gas/it was a brushcutter and trimmer all and all for homeowner it a 8 out of 10 reccomend it

  47. leigh bradley on December 17, 2021 at 2:15 pm

    Thanks for the vedio.. !! Always look at reviews before buying.. 👍👍

  48. Josh Chatwin on December 17, 2021 at 2:19 pm

    This one off eBay there’s one on eBay 139.99

  49. OG`s Fishroom on December 17, 2021 at 2:20 pm

    Im sorry whats the name of this product?

  50. Jo Mont on December 17, 2021 at 2:21 pm

    Dang still a good deal today but the prices like double

Leave a Comment