DIY Garden Bed Edging anybody can do

DIY Garden Bed Edging anybody can do

Let’s build a simple garden edging! Something that anybody can do and have great results, and at the same time time is different and unique from all the stone bed borders. Nothing more than some construction adhesive, a couple 2×4’s, different length 4×4’s, and some 5/4 deck boards for the top.

Help support the channel and the things I can show by using the links below, it costs nothing to use them, but helps me out so I can help you!

Get the Freshest CA Super glues in the market at Starbond (https://bit.ly/2KPcQTa)
Use Code CANADIYAN at checkout to save 15% off on your purchase!

– Tools/Materials Used (affiliate)
For Canadian Buyers:
Speed Square – https://amzn.to/2KkmI3H
Adhesive – https://amzn.to/2wMpLyo
Caulking Gun – https://amzn.to/2REdmDV
JBL N/C Headphones – https://amzn.to/2XFXh4e

For USA Buyers:
Speed Square – https://amzn.to/34CI3yq
Adhesive – https://amzn.to/3a9iYw3
Calking Gun – https://amzn.to/2Vambap
JBL N/C Headphones – https://amzn.to/3bcPXAV

-Filming stuff and Editing computer (affiliate)
For Canadian Buyers:
Camera – https://amzn.to/2FzFwwP
Camera Mic – https://amzn.to/3j67iPl
Voiceover Mic – https://amzn.to/3lNLnhw
CPU – https://amzn.to/346rqMZ
Motherboard – https://amzn.to/37i1rUL
RAM Memory – https://amzn.to/2H9DUKZ
Storage – https://amzn.to/344ZUzv
GPU Video Card – https://amzn.to/31vZfpd
Power Supply – https://amzn.to/3lYCt0V
Case – https://amzn.to/3dzTviM

-For USA Buyers:
Camera – https://amzn.to/2T2CLHu
Camera Mic – https://amzn.to/37loEoW
Voiceover Mic – https://amzn.to/2H4N2Aw
CPU – https://amzn.to/37e9fXK
Motherboard – https://amzn.to/3nUCCnX
RAM Memory – https://amzn.to/3lS3HWS
Storage – https://amzn.to/3lYHpTd
GPU Video Card – https://amzn.to/31g2vET
Power Supply – https://amzn.to/2HbHnbE
Case – https://amzn.to/3k63yP9

**************************************
Connect with me:
🛠EMAIL: canadiyanjesse@gmail.com
🛠INSTAGRAM: https://www.instagram.com/canadiyan_jesse/?hl=en
🛠PINTEREST: https://www.pinterest.ca/canadiyanjesse/_created/
🛠INSTRUCTABLES: https://www.instructables.com/member/CanaDIYan/

Other Channel with Slade:
https://www.youtube.com/channel/UC-qQtqcjoWHbNn9Kg46HHow

50 Comments

  1. MYOB MYOB on February 25, 2022 at 11:57 pm

    Finally someone uses super glue instead of nails/screws on a non load decorative project. Swear some people would nail grass down if they could, keep it simple, easy to change up.

  2. Ruth Scott on February 25, 2022 at 11:57 pm

    That looks great! I can’t imagine what it would cost with today’s wood prices (6/’21).

  3. Amerigo Vespucci on February 25, 2022 at 11:59 pm

    Great job… Nice and efficient. Thank you

  4. miguel santiago on February 25, 2022 at 11:59 pm

    What type of wood did you use? I’ve been trying to locate cedar and am not having luck without it being super expensive.

  5. BRANDS THAT CREATE LITTER on February 26, 2022 at 12:00 am

    4×4’s almost always are crazy warped, wouldn’t want to use them for anything accurate, unless they were very straight, but tbh for this ok, if you don’t mind them rotting in a few years.❤️

  6. Anne McAuley on February 26, 2022 at 12:00 am

    Great video. You make it look so easy with clear instructions. Definitely will be doing this. Thank you 😊

  7. Jud Niven on February 26, 2022 at 12:01 am

    FANTASTIC! This is exactly what I was hpoing to find and do for your backyard along a new fence I just built. Thanks!!

  8. Sam Hawal on February 26, 2022 at 12:01 am

    From in saet the smoel tember

  9. joel rios on February 26, 2022 at 12:02 am

    What kind of wood is that? Cedar?

  10. vikings844 on February 26, 2022 at 12:03 am

    Should have hammered in 24" rebar in first row of timbers into ground.

  11. mundl kalli on February 26, 2022 at 12:03 am

    great awesome video……easy instructions……thank you…..Any ideas on how to connect 4×4 ( about 4 10 footers on a slope that goes downhill but not straight,instead its wavy. question is to make it nice and straight ….Thank you again for the nice video

  12. Pollianna on February 26, 2022 at 12:05 am

    Fabulous, now I just need a manly man 😁

  13. vonetta greene on February 26, 2022 at 12:05 am

    That looks great

  14. the dyslexic on February 26, 2022 at 12:05 am

    I would put those 2x4s on the inside, not the outside, so that it is easier to mow next to the bed…and use a weed whacker.

  15. Olivier Beaulieu on February 26, 2022 at 12:08 am

    thanks alot man! i did this exact thing only longer and it looks fantastic!

  16. Omar De leon on February 26, 2022 at 12:09 am

    Awesome job

  17. Daniel Zaragoza on February 26, 2022 at 12:09 am

    Look nice

  18. Richard Keller on February 26, 2022 at 12:11 am

    Nice job. Do you have any other diy vids ?
    Thanks

  19. Nick on February 26, 2022 at 12:12 am

    Made the mistake of showing my girlfriend this video. She now wants me to do this all along the driveway flowerbed leading to the house. Great tutorial video and design. Look forward to doing something similar.

  20. Zurgit banzal on February 26, 2022 at 12:12 am

    Does It not need anchoring into the ground?

  21. Sig Sauer on February 26, 2022 at 12:12 am

    Everything looks great . I only have one suggestion. When you stack the (2) 4×4’s drill through them with a 3/8" drill bit, put about (3) holes in each 8′ section. Buy a 10′ (or a couple) length of 3/8" rebar and cut it into 24" sections. Use a small mini sledge hammer and drive the 24" spike through both 4×4’s into the ground. Now you will have a solid wall that won’t move over time and you can finish with your top cap and not see the tops of the spike or the holes.

  22. D. Love on February 26, 2022 at 12:14 am

    You made it look so easy! I’m excited to do mine now. Thanks for sharing!!!

  23. Wayne Andrews on February 26, 2022 at 12:14 am

    You could also drill some holes in your 4×4 and drive a foot or two of rebar through it into the ground for added stability. Then add your cap to cover the holes.

  24. davidlawlor04 on February 26, 2022 at 12:15 am

    Could you provide a materials list please

  25. Kevin Hunt on February 26, 2022 at 12:15 am

    That looks really nice. Attractive wood finish with the vertical blocks really does add character to it.

  26. Lee Dixon on February 26, 2022 at 12:17 am

    This was great and thanks for doing it!

  27. Rogue Spear on February 26, 2022 at 12:18 am

    Great job, you explain the process professionally. You are a pro!

  28. John H on February 26, 2022 at 12:19 am

    My son used this flower bed design for his Eagle Scout project. He built two 4′ x 6′ beds at his old elementary school in addition to some other work.

  29. Mark Naffie on February 26, 2022 at 12:28 am

    Well done! Wondering if it will survive the Michigan winters if stained every five years or so.

  30. Magpie Smith on February 26, 2022 at 12:29 am

    Well done 👍 Looks great 🌻

  31. Michael Montana on February 26, 2022 at 12:31 am

    nice job!

  32. J J on February 26, 2022 at 12:31 am

    Great video! Does this affect the foundation in any way because of the amount of watering or moisture? Thanks

  33. hopeangel1970 on February 26, 2022 at 12:32 am

    Am I the only one that noticed he used his foot to prop the board while he sawed it?

  34. Lebron Jameslol on February 26, 2022 at 12:36 am

    I like it, it would cost about a trillion dollars with wood prices the way they are. The only thing I would have added is attach landscape edging on the inside of the wood to keep some of the moisture off it.

  35. That Gaijin Fella on February 26, 2022 at 12:37 am

    Looks great and easy to follow, perfect for what I need to do to remodel my yard. I only worry the wood will warp with the humidity and rains we have in Japan, but I’m gonna give it a try.

  36. j james on February 26, 2022 at 12:38 am

    Great video! I did this exact garden bed 40’x4′. I reinforced the bottom 4×4 with spikes and I also cut the cosmetic 2×4’s 16" long and spiked them into the ground 9" deep and then secured to the 4×4’s. Thanks for the great tutorial!

  37. Frankie Ramirez on February 26, 2022 at 12:38 am

    Great job with the design and execution. It’s given me an idea to use dark stained wood length-wise and a different color to complement on top. Kudos!

  38. BlueJay Studio on February 26, 2022 at 12:40 am

    🤔Nice…BUT with the cost of lumber these days….a projects like this one get quite expensive…

  39. Jesus Zuniga on February 26, 2022 at 12:40 am

    Awesome work bro I wish I had you as my neighbor

  40. Christine Thomas on February 26, 2022 at 12:42 am

    omg that was such a great tutourial, there is something about a man who gets right into it without waffling on. Well done I think I could actually build this lol. Have a great day

  41. Jimmey Mcgee on February 26, 2022 at 12:42 am

    That was awesome young man! I got just the spot to do it too.

  42. hopeangel1970 on February 26, 2022 at 12:43 am

    This is the first in all my life, to see someone use their foot to hold a board up and saw it. Dude come on. Their are people that will try this! Lol.

  43. JRD on February 26, 2022 at 12:44 am

    Nice work man. Wish me luck on mine. Gonna follow your design if you don’t mind.

  44. Eimear Sweeney on February 26, 2022 at 12:46 am

    Looks great I’m going to try this technique out 👍

  45. Patricia on February 26, 2022 at 12:48 am

    I wood have used plastic wood ,last a life time with no maintenance,

  46. Uncle Gilbert on February 26, 2022 at 12:48 am

    0:55 Kids, please don’t use your foot when cutting timber.

  47. hopeangel1970 on February 26, 2022 at 12:48 am

    Good tutorial !

  48. Prannoy D'souza on February 26, 2022 at 12:49 am

    Can I get a Canadian link to the 10-12 inch metal spike?

  49. Val Rosenbaum on February 26, 2022 at 12:50 am

    Thank you for getting to the point from the get go. Well done!! Thank you!!

  50. David Bosquette on February 26, 2022 at 12:55 am

    Dude, this was so good. I plan to follow this for two side beds when I lay new grass turf. Thanks again dude. Amazing.

Leave a Comment